Front door
Steel door with perforations
Steel door without perforations
Glass door with perforations
Glass door without perforations
|
Exhaust fan kit
Fan tray with 2 exhaust fans (4", 48V
DC, xx CFM/fan)
On/Off switch with power on indicator and
2 feet power cord |
Rear door
Steel door with perforations
Steel door without perforations
Bolted rear panel |
Earthing / Grounding bar
3mm copper with Nickel coating rack mountable |
Removable side panels
(Option available only in 600mm deep ETSI
racks)
|
Equipment
mounting hardware kit
20/40/60 cage nuts
screws and washers
|
Eye bolts / lifting bolts (set of 4)
(With load spreader bars) |
Grouting
kit
Four anchor bolts and nuts
One set supplied (by default) with all Hanut
ETSI racks. |
Exhaust fan kit
Fan tray with 2 exhaust fans (4", 48V
DC, xx CFM/fan)
On/Off switch with power on indicator and
2 feet power cord.
|
Simple DC power distribution panel
Rack mountable unit
(Simple DC power distribution panel can accommodate
up to 12 miniature circuit breakers) |
Premium DC power distribution panel
(Rack mountable unit can accommodate up to
12 miniature circuit breakers and offers 3
power sockets) |
Simple DC power distribution panel
Rack mountable unit
(Simple DC power distribution panel can accommodate
up to 12 miniature circuit breakers) |
19" conversion kit
Comprises of 3 pairs of horizontal support
rails, one pair of 19" equipment mounting
rails and necessary hardware (screws &
nuts)
|
19" bracket pair
allows 19" mounting equipment to be mounted
in the ETSI rack |
|
Fixed shelf |
Cantilever shelf: 275mm deep |
|
Single use cable ties |
Packing options
Corrugated sheet wrapping
Corrugated sheet box
Wooden box |
Fan
speed controller and alarm unit [coming soon]
Increases the exhaust fan speed (RPM) when
it detects an increase in temperature inside
the rack. Increase in speed is proportional
to relative rise in temperature. The controller
unit operates the exhaust fans at full speed
only when the temperature inside the rack
exceeds pre set temperature. In case of fan
jam or failure the unit gives an audio and
visual alarm signal. |
Remote
environment monitoring unit [coming soon]
Monitors temperature and humidity, and detects
smoke and water presence in the rack and sends
report to administrator over TCP/IP link.
|
