|
Home
>> Products >>
IP rated 19 inch racks |
|
|
|
Hanut
Dust Protected 19" Racks |
|
|
|
|
|
|
|
Key
features and benefits provided by Hanut dust protected
19" racks |
|
|
19"
racks with dust protection |
|
|
Hanut
IP racks have IP51 protection rating meaning that
the racks are protected against access with a wire
(1.0 mm or greater in diameter), dust protected
(not dust proof i.e. dust may enter during specified
test but will not interfere with operation of the
equipment and impair safety) and can handle water
dripping vertically.
Hanut
India IP racks with higher degree of dust and water protection like IP52, IP53, IP54 and IP55 are also available.
|
|
|
|
|
Hanut
IP rated racks have welded rock solid construction |
|
|
Basic
frame of the Hanut IP rated enclosure is made from 2mm
CRCA sheet steel and is MIG welded for rock solid
strength and rigidity. All seams of the enclosure are continuously
welded and grounded smooth. In larger dust
protected enclosures body
stiffeners are used to maintain high rigidity.
Hanut IP racks are exceptionally strong
and rigid. |
|
|
|
|
IP
racks ship fully assembled |
|
|
So
there is no need to learn mechanical engineering
and spending hours in assembling the racks. Hanut
IP racks can be deployed quickly. |
|
|
|
Removable
doors |
|
|
Enable
easy access to housed equipment. Doors open full
120° thanks to the use of top quality hinges. |
|
|
|
Comprehensive
range of accessories |
|
|
A
list of available accessories is available
here.
Specially see the wide range of thermal management
accessories. |
|
|
|
|
|
Hanut
India IP rated racks are well suited for panel air conditioner
cooled computer server racks and telecom equipment
racks. |
|
|
|
|
Large
capacity cable entry provision |
|
|
Specially
developed cone shaped grommets enable easy entry
/ exit of data and power cables while maintaining
dust protection. |
Technical
specifications / Standard configuration of Hanut
IP racks |
|
|
|
Dimensions
Usable height: 12U to 45U
External width: 600mm, 800mm, 1000mm
External depth: 400mm, 600mm, 800mm, 1000mm
One 19" rack basic frame. The frame includes
top, base, 4 pillars and 2 pairs of fully adjustable
19" equipment mounting rails.
One toughened glass front door with 2 panel locks
One plain steel rear door with 2 panel locks
Two fixed sides
One cable entry gland plate with cone shaped grommets
in the base
One set of heavy duty Stainless Steel leveling feet
One set of grounding studs
Material of construction: 2mm CRCA sheet steel
Export quality and oil resistant gasket held in place with steel retaining
strips
Finish: powder coat over phosphatized surface.
Siemens Grey RAL 7035
Packing: Wooden pallet base; thermocoal + bubble
sheet + corrugated cardboard packing on the body. |
|
|
|
|